|
|
Cutting >
Sawing Tech Cell >
Sawing News Release List
Sawing related products
There are 47 products releases related to sawing.
The Kalamazoo Machine Tool model KS450 semiautomatic band saw is designed for production work requiring sawing of solids and structural shapes up to 14 in. at 90 degrees in full cycle, semiautomatic operation. It also is capable of double mitering 60 degrees to the left and right with a variable-spe...
12/16/08
Amada Cutting Technologies Inc. has launched two band saw models to help eliminate noise, vibrations, and cutting resistance.
The PCSAW430AX single-pulse cutting machine cuts material up to 16 in., and another single pulse machine, the PCSAW530AX, cuts material up to 21 in. The machines feature r...
11/11/08
Scotchman® Industries' CPO 350 circular cold saw features a double-clamping and self-centering vise that helps provide burr-free parts. The machine has 135-degree mitering ability and a miter-locking device that automatically stops at 45 degrees left, 90 degrees straight, and 45 degrees right, ...
11/11/08
Esco Tool offers a panel saw and steel track system that attaches to water wall boiler tubes using weld tabs that help determine the cut line.
The PanelHog® APS-438LP low-profile saw and EscoTrack™ System are designed to remove boiler tube panel sections in tight areas and require no ex...
10/14/08
CS Unitec's 1.3-HP pneumatic reciprocating saw is ATEX certified (Class 112 GcT5) for use in hazardous environments. The saw's durability makes this tool suitable for use in refineries, offshore oil, marine, mining, petrochemical, power generation, industrial plant maintenance, construction, and dem...
9/16/08
The model K12-14MS manual metallurgical saw from Kalamazoo Industries features an enclosed wet cutting area with dual coolant nozzles to contain abrasive particles.
The saw has a 14-in. abrasive wheel; a 5-HP, three-phase, 1,725-RPM TEFC motor; dual movable, 4-in. screw vises; and a 24-V halogen ...
9/16/08
Simonds® Intl. has introduced its new X-51™ bimetal band saw blades designed to handle the high temperatures generated by cutting exotic alloys and tough materials.
The band saw blades feature M51 tooth tips engineered to extend blade life when cutting cast iron, tool steel, die steel,...
8/12/08
Advanced Machine & Engineering Co. has published literature about its Speedcut saw blade manufacturing and services.
New carbide, cermet, and thin-kerf blades are available, along with complete in-house facilities for sharpening, retipping, and repairing older blades. Nearly any blade size can be...
8/12/08
DoALL Sawing Products offers model CP-21A, the first in a new line of high-production, dual-column band sawing machines. The band saw has a 2-in. blade and a 10-HP AC inverter band drive system with variable speeds from 40 to 360 FPM for cutting a range of materials up to 21 in. in diameter, round o...
8/12/08
The Cosen SH-500M mitering band saw is suitable for various job shop applications. With a 13-in.-round, 11-in. by 19.6-in. rectangular capacity, the saw comes with a 3-HP motor and variable speed control from 75 to 247 FPM. An independent, mounted control console allows operators to stand on the inf...
7/15/08
Kalamazoo Machine Tool's model H235 manual band saw cuts tubes, pipes, light structural shapes, and small solids up to 8 in. at 90 degrees. It is designed for light-duty cutting.
The saw, with its variable-speed blade from 65 to 320 FPM, can miter up to 60 degrees to the right. Heavy-duty constru...
5/13/08
The Kalamazoo Industries model K20FS lock-down-head saw is designed for cutting foundry gates and risers and has a stepped-in design on the front to simplify access.
The saw features a 20-in. abrasive wheel; a 2,500-RPM, 1-in. spindle with sealed ball bearings; a steel top; and cast-iron trunnion...
4/15/08
Scotchman® Industries Inc. offers an automatic cold saw. Available in ferrous and nonferrous models, the CPO 315 roller-feed automatic cold saw is designed to provide uninterrupted cutting on tubing, solids, and extrusions. It is suitable for high-volume and long-run applications.
The saw is...
4/15/08
Scotchman® Industries offers the SH 1419 band saw. The swing-head band saw has 60 degrees of mitering ability, with capacities of 14 by 19 in. at 90 degrees and 14 by 8 in. at 30 degrees.
Standard features include full-capacity bundle cutting, a 1-1/4-in. blade; carbide guides; preset blade ...
2/12/08
The M.K. Morse Co. has developed a new 14-in. Metal Devil circular saw blade for stainless steel.
According to the manufacturer, the blade combines optimized tooth geometry, vibration dampening, and specialized microcarbides to provide good cutting and reduce tooth chipping and blade vibration. I...
2/12/08
Kalamazoo Industries has introduced the model K20RS 20-in. abrasive wheel saw designed to cut structural steel and wide parts. The saw can be operated chop style for cutoff or radial style for long parts. The saw head moves lengthwise for wide cuts.
The saw features a 1-in. spindle arbor; 2,500-...
1/15/08
Kaltenbach Inc.'s SKL450NA automatic aluminum saw is designed for straight and miter cutting of aluminum profiles and solids, but also is capable of free-machining copper and brass extrusions and small solids.
Maximum rectangular capacity is 4 in. high by 8 in. wide at 90 degrees. Operators can m...
12/11/07
The AMSAW® S300 automatic sawing system from Advanced Machine & Engineering Co., designed for cutting ferrous and nonferrous materials, has a capacity of 3 in. to 12 in. and utilizes saw blade diameters from 24 in. to 36 in.
A 60-HP/4-kW spindle motor is provided with simplified controls. Th...
12/11/07
The M.K. Morse Co. offers a 14-in. metal cutting saw with dry-cutting technology. The saw is designed to provide long life, little or no sparks, good cut finish, and fast cutting.
The low-speed, high-torque motor is optimized for metal cutting at 15 amps and 1,300 RPM. The heavy-duty steel ba...
10/9/07
Kalamazoo Machine Tool's model KS600 semiautomatic band saw is designed for production sawing of solids and structural shapes up to 20 in. at 90 degrees in full-cycle, semiautomatic operation.
The saw offers double mitering up to 60 degrees left and right, with blade speed infinitely variable fro...
10/9/07
The M.K. Morse Co. offers its portable bimetal band saw blades in a 25-pack dispenser box.
The pack reduces inventory space requirements from more than 6 in. in height to 1 in., the company reports. Blades can be individually removed from the dispenser while unused blades remain protected until n...
8/7/07
Scotchman® Industries Inc. offers an automatic cold saw. Available in ferrous and nonferrous models, the CPO 315 roller-feed automatic cold saw is designed to provide uninterrupted cutting on tubing, solids, and extrusions. It is suitable for high-volume and long-run applications.
The saw is...
6/12/07
A portable pipe clamp system with automatic feed is available from CS Unitec for use with the company's portable pneumatic hacksaw.
The system easily attaches to the hacksaw and pipe and operates off the same 90 PSI air supply as the saw. The self-feeding device eliminates manual cutting and is ...
5/8/07
The M.K. Morse Co. recently introduced a master tradesman AV23M bimetal hole saw kit. Featuring Master Cobalt® bi-metal hole saws, the kit includes a range of popular diameters used by the professional tradesman for maintenance, plumbing, and electrical hole cutting requirements for pipe and co...
4/10/07
M.K. Morse Co. offers the newly engineered carbide-tipped M-FACTOR™ saw blade designed to increase productivity and blade life while reducing changeover and downtime cost.
A specially formulated submicron grade carbide tip is paired with aggressive triple chip tooth geometry for abrasive app...
3/13/07
Scotchman® Industries CPO 315 fully automatic hitch feed cold saw provides uninterrupted cutting on tubing or solids. The CPO 315 HFA comes equipped with either a supply table or a full-bundle loading attachment.
Both systems allow the saw to automatically load, trim, cut, and sort lengths u...
3/13/07
DeWALT, has introduced its D28715 heavy-duty 14-in. 5.5 max motor HP chop saw with a quick-change keyless blade change system.
The saw has a large stamped steel base and pivot bracket for added durability to withstand jobsite abuse. The base enables users to weld custom out-feed tables to the bas...
1/9/07
Accu-Lube® has introduced a new nozzle designed for near-dry sawing. The U nozzle allows the lubricant to be applied from behind the blade on the three sides of the blade.
The nozzle attaches to a two-pump applicator system to split the lubricant and applies a smooth coat directly to the cut...
1/4/07
The KDM14 double-head miter saw from Kalamazoo Industries features two heads, one fixed and one movable, with14-in. abrasive wheels. Both heads miter 45 degrees left or right.
Additional features include a 1-in. spindle arbor operating at 4,400 RPM, a 5-HP motor, air-operated power downfeed, and ...
12/12/06
Kalamazoo Industries Inc. has introduced the KM20-22V abrasive mitering saw for high-capacity cutting.
The saw accepts solid stock up to 4 in. and most shapes up to 6 in. when cutting at 90 degrees. When mitering at 45 degrees either to the left or right, the saw accepts up to 3-in. solids and mo...
10/10/06
Pat Mooney Inc. – The Saw Company carries the Nishijimax CNC carbide cutoff system designed for fully automatic cycles and is equipped with autoloaders and bar stockers.
After a bar length has reached the remnant end, the loading table introduces a new bar on the infeed conveyor. The gripper vise...
9/12/06
SteelMax LLC offers the S14 metal cutting saw that cuts cool and clean without burring, heat distortion, or sparking.
The saw cuts mild steel, stainless steel, and aluminum and features a 45-degree mitering capability along with a 15-amp motor operating at 1,400 RPM. It can also cut tubing, pipe,...
7/11/06
Pat Mooney Inc.-The Saw Company has introduced the Titan model from the FMB Pro Mitre series of FMB direct-drive saws that cuts 0 to 60 degrees with a 14-in. cutting capacity.
The hydraulic control downfeed and variable-speed saw drive allow the saw to cut a variety of material. The Accu-Cut blad...
6/13/06
Kalamazoo Industries has introduced the KM26D abrasive mitering saw.
The saw has a 26-in. blade with a capacity up to 9 in. at 90 degrees and up to 4 in. for solids and 6 in. for shapes at 45 degrees (right miter only).
Standard features include an air-operated chain vise; heavy steel safety g...
6/13/06
Sheet metal cutters from Jancy Engineering Inc. are made of M2 high-speed steel, which provides accuracy and rigidity in hole drilling operations.
With patented arbor systems, the hole cutters can be used in hand-held drill presses with 3/8-in. or ½-in. chucks. The arbor system allows for simplif...
4/11/06
The CSM14B 14-in. metal cutting saw with dry cutting technology from M.K. Morse Co. features a Metal Devil® carbide-tipped blade that operates spark-free.
The motor operates at 15 amps and 1,300 RPM. The heavy-duty steel base provides stability with predrilled holes to bolt down the unit to ...
3/7/06
Haas Saw & Supply offers a sawing machine line that incorporates technology manufactured in Austria by MFL.
With carbide-tipped blades and heavy-duty and rigid gearbox and machine base, the HK 1200 L132 layer saw cuts four 8-in.-dia. tubes with a 0.500-in. wall thickness simultaneously in 45 seco...
2/7/06
Peddinghaus Corp. has introduced a series of machines that incorporate new speed sawing technology to help manufacturers cut steel shapes faster while increasing throughput.
The technology, developed with Lenox, comprises three design components: a 20-HP motor that powers a 2 5/8-in. blade at a ...
2/7/06
Tru-Cut Saw Inc. offers its Aggressor line of thin-kerf, carbide-tipped saw blades for cutting tube, pipe, and solid ferrous materials in flying cutoff and recutting applications.
Available with carbide and cermet inserts, the multilayered coated blades cuts up to 1,200 SFM. A C-shaped, hooked chip...
9/13/05
ITW Rocol North America's Accu-Lube 9045 nozzle is designed for large circular saw blades from 30 in. to 120 in. in diameter.
The nozzle attaches to a three-pump applicator system and applies lubricant directly to the cutting edge and on both sides of the saw blade. It mixes lubricant and air at th...
8/9/05
L.S. Starrett Co. has introduced its Unified Shank™, a line of jigsaw blades that have a new shank design that is compatible with both universal shank and Bosch shank jigsaws, eliminating the need for different blades for different saws.
The line comprises of 16 blades suitable for any jigsaw cutti...
6/14/05
Hyd-Mech Group Ltd. has introduced the S 20DS double-mitering band saw. With a double swivel head and built-in stops for 90-, 45-, and 30-degree positions, the saw reduces setup and material handling times, the company says.
The saw incorporates an angle scale. A 1-in. blade driven by a 3-HP direct...
12/7/04
Makita’s model 413 13-amp 7 ¼-in. metal cutting saw cuts through sheet metal, steel studs, pipes, and rebar.
A large cutting capacity allows for single-pass, virtually spark-free cutting with a 3,500-RPM no-load speed. A tool-less heavy-duty blade cover enhances chip collection and insulates agains...
11/9/04
The L.S. Starrett Co. has introduced the Gladiator™ line of production cutting bimetal band saw blades suitable for a variety of metals and applications.
The blades feature bimetal construction with fatigue-resistant alloy steel backing for durability and heat resistance. The new tooth design fea...
10/12/04
LENOX® has introduced the HRc line of carbide-tipped band saw blades designed to cut highly abrasive materials, such as case-hardened materials, steel-belted tires, railroad track, and chrome-plated shafting.
The blades’ micrograined heat- and wear-resistant carbide teeth are applied u...
8/10/04
Metabo Corp. has expanded its Choice Cuts™ line of job-matched cutoff wheels with an aluminum oxide type 1 cut-off wheel for use with hard and heavy-gauge metals, such as stainless and abrasion-resistant steels, high-tensile alloys, chrome, and HASTELLOY®.
Available in 4 ½-in. an...
6/8/04
Admiral Drive Systems designs and manufactures automated storage and retrieval systems for steel sheet, tubes, and bars. The bar system accommodates long tubes and bars and integrates with an automatic sawing cell.
The high-density system tracks inventory from the storage area to the plant floor....
6/8/04
|
|
833 Featherstone Rd. 
Articles
3.gif)