|
|
Safety Tech Cell >
Safety Article List
Safety related articles
There are 116 articles related to safety.
A little more than a year after implementing stricter hexavalent chromium standards to the metalworking industry, OSHA has gone a step further and released respirator fit testing guidelines to complement the existing standard.
By: Shannon DeCamp - www.thefabricator.com, 10/28/08
 This article has been viewed: 293 times.  Printed: 28 times
According to the Bureau of Labor Statistics, in the U.S. nearly 100 workers are killed and another 20,000 are seriously injured annually in forklift-related incidents. Knowing how they occur and studying the events that lead up to them can go a long way in preventing typical accidents.
www.thefabricator.com, 10/14/08
This article has been viewed: 381 times. Printed: 41 times
Safety should be a business priority beginning with the employee hiring process. Once you have hired the right people, you can ensure the success of your safety program by building relationships, giving employees’ safety concerns the attention they deserve, and resolving issues in a timely manner.
By: Kelly Langdon, Contributing Writer - www.thefabricator.com, 8/12/08
This article has been viewed: 703 times. Printed: 59 times
Welding and cutting, which accounts for 1 percent of structure fires and 4 percent of nonhousehold property damage, is the most dangerous type of hot work, according to the National Fire Protection Association (NFPA). Companies that weld and cut should take specific steps to increase safety and mini...
By: Michael Bishop, Assistant Editor - The FABRICATOR®, 7/15/08
This article has been viewed: 807 times. Printed: 54 times
Welding injuries, from minor welding flash burns to serious third-degree burns, can be painful and, in extreme cases, can cause disfigurement and lead to career-ending disabilities. Wearing the proper personal protective equipment (PPE) is an easy way welders can help protect themselves against thes...
By: Tom Kijewski - www.thefabricator.com, 5/13/08
This article has been viewed: 1,543 times. Printed: 67 times
The metal fabricating industry is among the employment sectors with the highest rates of amputations from on-the-job accidents. Many are caused by improperly safeguarded machinery, hand tools, forklifts, and other equipment. Preventing workplace amputations requires adhering to strict safety gui...
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 5/13/08
This article has been viewed: 928 times. Printed: 58 times
Can workplace accidents be predicted and prevented? Aeroglide safety professional Kelly Langdon believes it’s not only possible, but that doing so is critical for a company’s success. In this article, Langdon explains the three-step process he uses to ensure his company’s employees’ well-being.
By: Kelly Langdon, Contributing Writer - www.thefabricator.com, 4/15/08
This article has been viewed: 1,077 times. Printed: 78 times
An automotive stamping plant located in Plymouth, Mich., recently integrated more welding cells. In an effort to continue with its aggressive stance on employee health, the company integrated RoboVent™ air filtration systems from Great Lakes Air Systems.
www.thefabricator.com, 3/11/08
This article has been viewed: 514 times. Printed: 71 times
Welders looking for welding helmets have a lot of options to choose from. With everything that is available, it is important for welders to be informed of the protection levels of each helmet as well as the features each provide in order to find the right helmet for the job.
www.thefabricator.com, 1/15/08
This article has been viewed: 2,553 times. Printed: 118 times
The Occupational Health and Safety Administration (OSHA) recently made changes to its Respiratory Protection Standard. By answering 6 FAQs regarding respirators, you will be better equipped to implement or update an existing respiratory program.
By: Shannon DeCamp - www.thefabricator.com, 11/6/07
This article has been viewed: 977 times. Printed: 114 times
In the wake of the implementation of OSHA’s hexavalent chromium standard, read three fab shops’ efforts to provide safe breathing conditions for its welders.
By: Amanda Carlson, Associate Editor - www.thefabricator.com, 9/11/07
This article has been viewed: 1,527 times. Printed: 124 times
Autodarkening helmets do more than just protect welders from infrared and ultraviolet light the second the arc is struck. By allowing users to keep the helmet down over the face, the helmets help to prevent unnecessary neck strain, which can lead to long-term repetitive stress injury.
By: Tom Sommers - www.thefabricator.com, 9/11/07
This article has been viewed: 1,202 times. Printed: 115 times
Welders who ignore healthy work practices today are putting their long-term health in jeopardy. Being aware of some of the less obvious health hazards can help to ensure healthy living later in life.
By: Michael Ladd - www.thefabricator.com, 7/10/07
This article has been viewed: 2,588 times. Printed: 184 times
Many times industrial safety programs focus solely on safe equipment operation and other obvious hazards while ignoring simpler concerns. Addressing these concerns can make an important difference in worker safety, morale, and productivity. This article provides examples of common concerns and ho...
By: Kelly Langdon, Contributing Writer - www.thefabricator.com, 6/26/07
This article has been viewed: 1,256 times. Printed: 132 times
Appropriate warning signage is a critical component of industrial safety—often the last reminder regarding some aspect of safe machine operation. Labels have come a long way since "Keep Off" and "Keep Out." Various standards are having an impact on new labeling, making these messages more effect...
By: Russ Butchko, Contributing Writer - www.thefabricator.com, 5/22/07
This article has been viewed: 1,533 times. Printed: 167 times
Compliance with the Occupational Safety and Health Administration (OSHA) hexavalent chromium [Cr(VI)] standards requires certain industries, including steel fabrication, to meet specific respiratory protection requirements. This Q and A article identifies affected industries and applications and...
By: The 3M Occupational Health and Environmental Safety Division - www.thefabricator.com, 5/8/07
This article has been viewed: 2,654 times. Printed: 199 times
A manufacturer of hospital and nursing home furniture upgraded its air filtration systems in its London, Ont., Canada, manufacturing plant.
www.thefabricator.com, 5/8/07
This article has been viewed: 1,522 times. Printed: 163 times
Assessing the work environment, creating programs, and training staff to abide by those programs are the keys to maintaining a safe work environment and avoiding steep fines, worker injury, or death.
By: Shannon DeCamp - www.thefabricator.com, 3/13/07
This article has been viewed: 1,876 times. Printed: 176 times
Interlocks serve as safety devices on industrial equipment and many consumer products. This article explains some applications, describes different types of interlocks, and provides recommendations for resources that can help you determine the requirements for interlocks, along with their advant...
By: Gary M. Hutter, P.E. C.S.P., Contributing Writer - The FABRICATOR®, 3/13/07
This article has been viewed: 3,467 times. Printed: 190 times
Autodarkening technology has established a firm place in the welding industry not only as a piece of equipment that provides excellent protection, but also as a means to improve welding performance.
By: Derek Baker - The FABRICATOR®, 1/9/07
This article has been viewed: 2,608 times. Printed: 204 times
Now that OSHA's new ruling on hexavalent chromium is official, fabricators and manufacturers across the country are examining their plants, monitoring their air, and making adjustments to reduce their permissible exposure limits (PELs) to the fumes produced specifically by stainless steel welding.
By: Stephanie Vaughan, Contributing Writer - www.thefabricator.com, 11/7/06
This article has been viewed: 3,203 times. Printed: 248 times
The "Welding Wire" e-newsletter asked subscribers their opinions about who is responsible for ensuring welder health and safety. This article describes the hazards inherent in welding and contains insight from a welding instructor, a business owner, and individuals with personal knowledge of uns...
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 10/10/06
This article has been viewed: 4,899 times. Printed: 261 times
The subject of oxyfuel safety is vast and would take volumes to cover completely. In fact, most large companies involved in oxyfuel cutting and welding publish their own procedural guidelines for employees to follow.
By: John Uccellini, Contributing Writer - www.thefabricator.com, 10/3/06
This article has been viewed: 4,167 times. Printed: 239 times
By addressing six common hazards, companies that perform pipe and tube welding can provide a safe and healthy work environment for their employees.
By: Terry Byrd - www.thefabricator.com, 9/13/06
This article has been viewed: 3,644 times. Printed: 222 times
Lack of safe operating procedures and safety rule enforcement, as well as insufficient or inadequate training, lead to tens of thousands of injuries each year. Safe forklift practices through proper use, adequate maintenance, sufficient clearing for travel, and correct load stability are the best wa...
By: Shannon DeCamp - The FABRICATOR®, 8/8/06
This article has been viewed: 5,558 times. Printed: 263 times
Lock-out/tag-out procedures are critical when you're dealing with equipment or machines powered by electricity, steam, hydraulics, gas, compressed air, or a combination of sources.
By: Shari Falkenburg - www.thefabricator.com, 7/11/06
This article has been viewed: 2,980 times. Printed: 254 times
Although the upfront costs of installing machine safeguards can be expensive, it is far more expensive to put your company at risk for employee injury and the resulting medical expenses, lost production, fines, and lawsuits.
By: Ashley Hildreth - The FABRICATOR®, 6/13/06
This article has been viewed: 1,942 times. Printed: 198 times
Hand-arm Vibration Syndrome (HAVS), vibration white-finger, and carpal tunnel syndrome are all side effects of vibration overexposure, which can occur through using grinders often. Find out how to prevent these effects and reduce your overexposure to vibrations from using grinders and other power to...
By: Mitch Burdick - www.thefabricator.com, 5/9/06
This article has been viewed: 3,377 times. Printed: 243 times
Accidents and injuries can occur in all workplaces. Having a well-thought-out emergency response plan and properly organized and trained team can help minimize trauma and damage. This article discusses one company's emergency response program and gives an example of its effectiveness.
By: Kelly Langdon, Contributing Writer - www.thefabricator.com, 5/9/06
This article has been viewed: 2,458 times. Printed: 229 times
Changes are necessary to make sure your welding operation is compliant with OSHA's new permissible exposure limit for hexavalent chromium.
By: Shannon DeCamp - www.thefabricator.com, 5/9/06
This article has been viewed: 7,013 times. Printed: 443 times
Optoelectronic sensing devices safeguard machine access and prevent injuries related to hazardous machine motion. The ultimate goals are to prevent access to the hazard, eliminate the hazard before access is attained, and prevent the unintended operation of a machine.
By: Israel E. Alguindigue, Ph.D. - www.thefabricator.com, 2/7/06
This article has been viewed: 3,615 times. Printed: 293 times
Companies should develop a written fall protection plan and maintain it on the job site. The plan must describe how your company will protect workers on a given work site when employees are working 10 feet or more above the ground, other work surfaces, or water.
www.thefabricator.com, 1/10/06
This article has been viewed: 3,890 times. Printed: 287 times
Work-related ergonomic injuries can exact a high price from employers and employees in both factory and office environments. Even a few incidents can deal a severe financial blow to small and medium-sized companies. Identifying potential risks and developing and implementing an effective ergonomics ...
By: Ron Wood, SPHR, Contributing Writer - www.thefabricator.com, 12/13/05
This article has been viewed: 6,389 times. Printed: 272 times
An effective safety awareness program keeps safety uppermost in employees' minds, reduces accidents, and has a positive impact on the bottom line. This article describes one company's program that's both effective and fun. It might be just what you need to help improve your company's safety reco...
By: Mark Paulson, Contributing Writer - The FABRICATOR®, 11/8/05
This article has been viewed: 5,542 times. Printed: 261 times
Automotive parts manufacturer Pridgeon & Clay was looking for a way to manage the growth it was forecasting. The company decided to buy several robotic welding workcells and modular air filtration systems so it could rearrange the facility's layout and give the company the opportunity to buy one pie...
www.thefabricator.com, 11/8/05
This article has been viewed: 2,802 times. Printed: 265 times
Although the health effects of welding exposures often are difficult to predict, components of welding fumes have a range of toxicities that, under the right conditions, can affect many parts of the body adversely. Knowing what situations and welding process components can negatively impact your hea...
By: Clifford Frey - www.thefabricator.com, 10/11/05
This article has been viewed: 5,427 times. Printed: 420 times
Shipyard work is among the most hazardous occupations. Researching possible dangers and following standards and recommended guidelines can reduce injuries and illnesses and prevent OSHA fines.
By: Vicki Bell, Web Content Manager - The FABRICATOR®, 9/13/05
This article has been viewed: 4,524 times. Printed: 347 times
On May 10 Jerrold Dodd was not spinning a yarn about the Occupational Safety and Health Administration (OSHA). The general manager and chief operating officer of a spinning company warned a congressional subcommittee about OSHA's aggressive action against his small company.
By: Dan Davis, Editor-in-Chief - www.thefabricator.com, 8/9/05
This article has been viewed: 2,079 times. Printed: 268 times
The current economy has altered the organization of work. This article discusses the changes and their impact on the work force in terms of job safety and health.
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 7/12/05
This article has been viewed: 3,180 times. Printed: 468 times
Relating personal experiences, welding professional and instructor Marty Rice discusses welding hazards and stresses the importance of learning and following all welding safety practices.
By: Marty Rice, Contributing Writer - www.thefabricator.com, 7/12/05
This article has been viewed: 5,253 times. Printed: 457 times
...
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 6/14/05
This article has been viewed: 8,866 times. Printed: 617 times
...
www.thefabricator.com, 5/10/05
This article has been viewed: 2,140 times. Printed: 371 times
...
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 5/10/05
This article has been viewed: 6,225 times. Printed: 889 times
Editor's Note: A version of this article previously appeared in the Jan./Feb. issue of Connections, FMA's member newsletter.
By: Cheryl Henderson, CSP, and Mike Westerbrook, Contributing Writers - www.thefabricator.com, 4/11/05
This article has been viewed: 4,494 times. Printed: 797 times
...
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 3/8/05
This article has been viewed: 5,601 times. Printed: 475 times
...
By: Steve D. Benson, Contributing Writer - www.thefabricator.com, 2/8/05
This article has been viewed: 3,925 times. Printed: 478 times
Editor's Note: This article is adapted from "Health Care Costs: Where Do We Go From Here?" presented by Neil Trautwein, assistant vice president, human resources policy, with the National Association of Manufacturers, at the association's Future of Manufacturing Forum July 21, 2004.
www.thefabricator.com, 1/11/05
This article has been viewed: 3,359 times. Printed: 511 times
...
By: Gregory Gronbacher, Contributing Writer - www.thefabricator.com, 11/9/04
This article has been viewed: 3,386 times. Printed: 523 times
...
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 11/8/04
This article has been viewed: 2,871 times. Printed: 442 times
...
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 10/12/04
This article has been viewed: 5,809 times. Printed: 701 times
Although a fully clad welder can appear somewhat overdressed, each piece of protective clothing is necessary to ensure personal safety. Welders who shun safety equipment often have scars or health problems as reminders of shortcuts they took.
By: Karen Hamel, Contributing Writer - www.thefabricator.com, 10/12/04
This article has been viewed: 6,669 times. Printed: 514 times
...
By: Jerry Basta, Contributing Writer - www.thefabricator.com, 8/10/04
This article has been viewed: 6,616 times. Printed: 665 times
...
By: David Withrow, Contributing Writer - www.thefabricator.com, 7/13/04
This article has been viewed: 5,727 times. Printed: 557 times
...
By: Gary Hutter, P.E., Ph.D., Contributing Writer - www.thefabricator.com, 6/8/04
This article has been viewed: 8,255 times. Printed: 767 times
...
By: Charlie McCarthy, Contributing Writer - www.thefabricator.com, 6/8/04
This article has been viewed: 3,408 times. Printed: 549 times
...
By: Mark Paulson, Contributing Writer - www.thefabricator.com, 5/4/04
This article has been viewed: 2,820 times. Printed: 432 times
Being expected to wear more than one hat at work these days is commonplaceâ??but not more than one welding helmet.
By: Stephanie Vaughan, Contributing Writer - www.thefabricator.com, 4/6/04
This article has been viewed: 5,856 times. Printed: 853 times
...
By: Cheryl Henderson, CSP, Contributing Writer - www.thefabricator.com, 4/6/04
This article has been viewed: 2,938 times. Printed: 471 times
...
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 3/25/04
This article has been viewed: 3,431 times. Printed: 474 times
...
By: Marty Rice, Contributing Writer - www.thefabricator.com, 3/11/04
This article has been viewed: 11,604 times. Printed: 821 times
According to the National Institute for Occupational Safety and Health (NIOSH), more than 400,000 U.S. men and women are employed in welding and related occupations. Some studies suggest that these workers are at risk of serious respiratory, neurological, and reproductive effects. More and better da...
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 3/11/04
This article has been viewed: 16,155 times. Printed: 1,122 times
You’re at work and a fire alarm or other emergency warning device sounds. Do you know what to do? Where to go and the appropriate route to get there?
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 2/12/04
This article has been viewed: 3,076 times. Printed: 438 times
In December 2003 the U.S. Department of Labor’s Bureau of Labor Statistics (BLS) released its 2002 occupational injuries and illnesses data. A total of 4.7 million nonfatal injuries and illnesses were reported in private-industry workplaces during 2002, resulting in a rate of 5.3 cases per 100 equiv...
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 1/29/04
This article has been viewed: 5,401 times. Printed: 487 times
Several technical articles have addressed respiratory diseases associated with welding activities and when a respirator should be used to help prevent these diseases. Once an employer concludes that respiratory protection is the appropriate option for a particular application, the next step is selec...
By: Clifford Frey, Contributing Writer - www.thefabricator.com, 1/29/04
This article has been viewed: 2,876 times. Printed: 499 times
The beginning of a new year is a good time to think about what’s important in life and what changes you can make to benefit yourself and those around you. Safety practices and good health should be on everyone’s priority lists. Adopting certain behaviors will help optimize your health, ensure your s...
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 1/13/04
This article has been viewed: 2,314 times. Printed: 471 times
...
By: Stephanie Vaughan, Contributing Writer - www.thefabricator.com, 1/13/04
This article has been viewed: 5,733 times. Printed: 638 times
Handling material is a daily function in the workplace. All too often it is a task taken for granted, with little knowledge of or attention to the consequences if done incorrectly. Management and employees need to look at and evaluate how material goods are handled inside and outside their facilitie...
By: Charlie McCarthy, Contributing Writer - www.thefabricator.com, 10/23/03
This article has been viewed: 8,223 times. Printed: 665 times
Welders are among the millions of workers who face respiratory hazards every day in the workplace. Confined spaces, solvents, and gas emissions, as well as welding, grinding, and soldering, may expose workers to airborne hazards.
By: Justin Bruursema, Contributing Writer - www.thefabricator.com, 10/23/03
This article has been viewed: 2,796 times. Printed: 502 times
In the industrial environment, safety glasses are a necessity for jobs that put employees’ eyes at risk of exposure to heat, impact, chemicals, or dust. But workers also need protection from nonimpact dangers, such as radiant energy, eye strain, and fatigue. So choosing the appropriate lens or...
By: Julie Copeland, Contributing Writer - The FABRICATOR®, 10/9/03
This article has been viewed: 12,121 times. Printed: 925 times
...
By: Kelly Langdon, Contributing Writer - www.thefabricator.com, 10/9/03
This article has been viewed: 2,837 times. Printed: 428 times
...
By: Jerold Jay, Contributing Writer - The FABRICATOR®, 9/25/03
This article has been viewed: 6,118 times. Printed: 589 times
In 1993, the International Union, United Automobile, Aerospace & Agricultural Implement Workers of America (UAW) petitioned the Occupational Safety and Health Administration (OSHA) to take emergency regulatory action to protect workers from the risks of occupational cancers and respiratory illnesses...
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 9/10/03
This article has been viewed: 2,999 times. Printed: 477 times
...
By: George Eberl, Contributing Writer - www.thefabricator.com, 8/28/03
This article has been viewed: 3,165 times. Printed: 431 times
If you’ve visited a doctor recently and were told that stress is the cause of or a contributing factor to what ails you, you’re not alone. Although you can’t expect to eliminate all of the stress in your life, you can learn to manage it and reduce its negative effects.
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 8/14/03
This article has been viewed: 4,516 times. Printed: 972 times
Does any welding shield manufacturer make a hood with earmuffs? The reason I ask is that I wear hearing aids. I teach welding and it’s too hard to keep removing the hearing aids.- K. Stevens
www.thefabricator.com, 8/14/03
This article has been viewed: 2,671 times. Printed: 489 times
I have recently been appointed as the Safety Director for my company. I have no formal training in occupational safety. Can you give me some direction for finding information about developing and implementing a Safety/Loss Control program for my company?- M. Lloyd
www.thefabricator.com, 8/14/03
This article has been viewed: 2,330 times. Printed: 557 times
Stress is a fact of life. It’s here to stay, and even if we could abolish it, we wouldn’t want to. At its best, stress can be the catalyst that moves us to make changes and achieve great things in life. At its worst, it can create all kinds of emotional and physical problems. What determines whether...
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 7/24/03
This article has been viewed: 2,881 times. Printed: 458 times
...
By: Larry Dunville, Contributing Writer - www.thefabricator.com, 7/10/03
This article has been viewed: 16,891 times. Printed: 1,045 times
Modifying your safety program to address the needs of your Spanish-speaking employees can create a much safer work environment. Here’s how one company achieved that goal.
By: Kelly Langdon, Contributing Writer - www.thefabricator.com, 6/26/03
This article has been viewed: 2,602 times. Printed: 407 times
Do you know the Fabricators & Manufacturers Association, International™ (FMA)/CNA Safety Committee? If not, you should. They’re an excellent resource for guidance on workplace safety issues. And they’re the force behind the safety focus on thefabricator.com.
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 6/12/03
This article has been viewed: 3,145 times. Printed: 498 times
This article explores the facts about AEDs, the legalities surrounding their use by laypersons, and guidelines for implementing an AED program in the workplace.
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 5/29/03
This article has been viewed: 4,403 times. Printed: 452 times
Sixty percent of respondents to a recent survey consider health and wellness programs a viable incentive to stay at their current jobs. But it must be the right program, one that addresses the employees' concerns.
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 4/24/03
This article has been viewed: 6,875 times. Printed: 700 times
The toll that substance abuse takes on the abuser, his or her family and friends, and those who become victims of substance abuse-induced accidents and crimes is well-documented.
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 4/10/03
This article has been viewed: 8,626 times. Printed: 618 times
...
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 3/27/03
This article has been viewed: 3,706 times. Printed: 449 times
It was just a 20-minute welding job in a basement boiler-room, but it left the plumber feeling lightheaded and nauseated and gave him a headache that lasted until the next morning.
By: David S. Luther, Contributing Writer - www.thefabricator.com, 3/27/03
This article has been viewed: 3,675 times. Printed: 570 times
Each year in the U.S. nearly 100 workers are killed and another 20,000 are seriously injured in forklift-related incidents. Workers who operate or work near forklifts may be struck or crushed by the machine or the load being lifted. Most fatalities occur when a forklift that has overturned or fallen...
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 2/13/03
This article has been viewed: 5,514 times. Printed: 534 times
Using orbital welding equipment led to productivity gains in one of the nation's first fusion-welded underground pipelines.
By: Karen D. Hamel, Contributing Writer - www.thefabricator.com, 1/16/03
This article has been viewed: 6,862 times. Printed: 633 times
Editor's Note: This article is based on the 1998 Criteria for a Recommended Standard: Occupational Noise Exposure published by the National Institute of Occupational Safety and Health (NIOSH).
By: Vicki Bell, Web Content Manager - www.thefabricator.com, 1/16/03
This article has been viewed: 3,076 times. Printed: 495 times
A successful safety awareness program continually reminds employees to work safely using proper procedures when performing all tasks. To have a real and lasting effect, the safety awareness program must be both pertinent to the specific activities of the workplace and be consistent day to day. How...
By: Mark Paulson, Contributing Writer - The FABRICATOR®, 1/16/03
This article has been viewed: 5,469 times. Printed: 485 times
A good welder is a lazy welder, according to Greg Lamm -- but when he says lazy, he
means comfortable. His microwelding workstation has been set up with ergonomics in
mind.
By: Stephanie Vaughan, Contributing Writer - www.thefabricator.com, 11/21/02
This article has been viewed: 3,520 times. Printed: 464 times
The weather affects welders no matter what climate they live in, and even more so out in the field. The key is to learn how to cope with extreme temperatures.
By: Marty Rice, Contributing Writer - www.thefabricator.com, 11/7/02
This article has been viewed: 4,377 times. Printed: 425 times
In work environments that generate noise that exceed 85 dB or with impact noises exceeding 140dB, such as found in tube and pipe, OSHA requires a hearing conservation program.
By: Linda Baldwin, Contributing Writer - The FABRICATOR®, 10/24/02
This article has been viewed: 3,484 times. Printed: 482 times
Dressing properly for welding involves many facets of safety, including proper use of personal protective equipment and welding tools as well as protective apparel. Welders should be aware of the hazards they will face on their job and know to dress for them so they can protect themselves from all p...
By: Julie Copeland, Contributing Writer - www.thefabricator.com, 9/26/02
This article has been viewed: 4,907 times. Printed: 394 times
According to OSHA, it is estimated that 9 out of 10 occupational related eye injuries could be avoided through the use of proper safety equipment. OSHA's 1910.133 places the responsibility for eye safety squarely on the shoulders of the employer. Goggles, spectacles and face shields protect the eyes...
By: Erica Osley, Contributing Writer - The FABRICATOR®, 9/26/02
This article has been viewed: 4,604 times. Printed: 600 times
Selecting the right respirator for a welder involves examining the processes used, the workplace environment, and the types of base metal and consumables used. This article offers tips for finding the right respirator for your application, preferences, and workplace.
By: Larry Janssen, Contributing Writer - www.thefabricator.com, 8/29/02
This article has been viewed: 3,532 times. Printed: 569 times
Welding smoke and fumes can be dangerous, but there are several types of equipment designed to clean the air welders breathe. Capturing airborne pollutants at the welding source is the most effective technique available. Common designs include source capture arms, portable source capture air cleaner...
By: Jerold Jay, Contributing Writer - The FABRICATOR®, 8/8/02
This article has been viewed: 5,612 times. Printed: 644 times
This article provides some statistical analysis, causes for, and tips to consider regarding welding and cutting fire and explosions. It includes a sidebar about governing codes and questions to ask regarding fires and explosions when welding or cutting is suspected in an incident.
By: Stephanie Vaughan, Contributing Writer - www.thefabricator.com, 6/27/02
This article has been viewed: 3,958 times. Printed: 448 times
It's never a good time to forget about safety. Take it from a guy who knows.
By: Marty Rice, Contributing Writer - www.thefabricator.com, 6/27/02
This article has been viewed: 3,904 times. Printed: 480 times
The best way to make sure that machine operators can do their jobs effectively with proper safeguarding is to desgin machine systems around those safety devices in the first place.
By: Steve Freedman, Contributing Writer - www.thefabricator.com, 5/30/02
This article has been viewed: 4,161 times. Printed: 894 times
To ensure workplace health and safety, both employees and employers need to recognize hazards and prevent accidents.
By: Chris Van Hoven, Contributing Writer - www.thefabricator.com, 3/14/02
This article has been viewed: 5,810 times. Printed: 853 times
This article reviews the OSHA and ANSI standards for using safety spectacles in the workplace, describes scratch-resistance and anti-fog coatings, describes safety spectacle protection from ultraviolet and infrared radiation, and provides tips for choosing and using safety glasses.
By: John R. Womer, Contributing Writer - www.thefabricator.com, 2/14/02
This article has been viewed: 4,580 times. Printed: 669 times
This article combines examples of fires caused by inadequate protection from welding with information on heat-resistant textiles and how they can be used to provide that protection.
By: Kathie Leonard, Contributing Writer - www.thefabricator.com, 12/13/01
This article has been viewed: 4,037 times. Printed: 538 times
This article takes a look at using infrared thermography in the plant setting to detect potential fire hazards. It discusses who can provide the service, what sorts of problems it can detect, and generally explains how the problems discovered when using this technology should be handled. It also use...
By: Mark Paulson, Contributing Writer - The FABRICATOR®, 11/29/01
This article has been viewed: 2,370 times. Printed: 533 times
The expanded breadth of recent standards typically includes the entire life expectancy of machines, the full scope of possible risks, the frequency and severity of risks, and the possibility of harm.
By: David Withrow, Contributing Writer - The FABRICATOR®, 11/15/01
This article has been viewed: 4,049 times. Printed: 386 times
The article explains how to carry out a facility and process evaluation and discusses the basics of in-plant air filtration system selection.
By: Wayne Bonham, Contributing Writer - The FABRICATOR®, 11/15/01
This article has been viewed: 2,853 times. Printed: 412 times
This article outlines dangers of fume exposure to welders using exotic or specialty metals. The author offers a three-tiered approach to protecting the welder from fumes.
By: Karen D. Hamel, Contributing Writer - www.thefabricator.com, 10/11/01
This article has been viewed: 4,382 times. Printed: 549 times
Proper clothing, training, procedures, troubleshooting, preparation, and equipment for HF welding are critical if you want to prevent workplace accidents.
By: Ray Cagganello, Contributing Writer - www.thefabricator.com, 10/11/01
This article has been viewed: 4,253 times. Printed: 557 times
This article examines the hazards associated with metalworking fluids. Health effects, including skin and respiratory disorders and cancer, are addressed. A look at engineering and administrative controls that can be implemented to ensure the safe use of metalworking fluids is included.
By: Scott R. Meyer and William S. Boslett, Contributing Writers - The FABRICATOR®, 9/17/01
This article has been viewed: 4,049 times. Printed: 521 times
If you want a safe press operation, look beyond the machinery. Don't be surprised to find the keys to a good safety program well outside the confines of the pressroom.
By: Herb Kamphausen, Contributing Writer - www.thefabricator.com, 8/23/01
This article has been viewed: 3,212 times. Printed: 562 times
What happens when a hydraulic system—pumps, hoses, and fittings—fails?
Knowing how to avoid, cope with and clean up the mess to ensure personnel safety and minimize downtime could come in very handy one day.
By: Karen D. Hamel, Contributing Writer - www.thefabricator.com, 8/16/01
This article has been viewed: 5,335 times. Printed: 858 times
Maintaining a safe work environment in facilities in which hot work, such as welding, is done can be easier said than done. Measures such as preventive safety, safety zones, and fire watches can keep employees safe and worker's comp time down
By: Factory Mutual Engineering Corp. - The FABRICATOR®, 7/26/01
This article has been viewed: 3,747 times. Printed: 528 times
When people think of machine guarding, usually they think of devices to protect people from the moving parts on machinery.
By: Gerry Timms, Contributing Writer - www.thefabricator.com, 7/12/01
This article has been viewed: 3,655 times. Printed: 637 times
OSHA has regulations for both facets of thermal spray environment, and shops should be aware of some practical safety tips for how to comply with those regulations.
By: Charles P. Howes, Contributing Writer - www.thefabricator.com, 7/12/01
This article has been viewed: 5,955 times. Printed: 732 times
Whether we are attending a social occasion or dressing for the job, we all give some thought about what we are going to wear.
By: Howard Cary, Contributing Writer - www.thefabricator.com, 5/30/01
This article has been viewed: 6,613 times. Printed: 867 times
Addressing laser beam hazards, safety regulations for laser use, and methods to improve laser safety should be foremost in the mind of every laser machine operator.
By: William J Ertle and R. James Rockwell Jr., Contributing Writers - The FABRICATOR®, 5/15/01
This article has been viewed: 3,956 times. Printed: 454 times
Although various safety committees differ somewhat from plan to plan, they all function as a means to promote workplace health and safety. Different components of a safety plan include responsibilities, activities, and the structure of each company's committee.
By: Stephanie Vaughan, Contributing Writer - www.thefabricator.com, 4/24/01
This article has been viewed: 3,739 times. Printed: 457 times
|
|
833 Featherstone Rd. 
Articles