|
|
Cutting >
Plasma Cutting Tech Cell >
Plasma Cutting News Release List
Plasma cutting related products
There are 50 products releases related to plasma cutting.
Hypertherm has introduced the Powermax45®, a portable, 1/2-in. plasma cutting and gouging system. The single-gas system (air and nitrogen) is designed for both hand-held and mechanized applications.
With a recommended 1/2-in. cut capacity and 1-in. severance, the 37-lb. system is suitable f...
12/16/08
The American Torch Tip Co. offers replacement parts for use on the Kaliburn Proline 2200 and 2600 plasma torches.
The parts are manufactured in the company's Bradenton, Fla., facility. The emphasis has been on developing a high-quality product with extremely close tolerances to help ensure good ...
11/11/08
Hypertherm's Centricut brand has announced the availability of 275-amp consumables for InnerLogic (Kaliburn) ProLine 2260 and FineLine 260 systems.
The new consumable line includes the company's patented SilverLine® electrodes, which have a solid silver front end welded to a copper electrode...
8/12/08
ESAB Welding & Cutting Products has launched two new models in its PowerCut™ line of Plasmarc™ manual cutting packages. The lightweight, portable 1600 and 1300 models offer the highest speeds and thickness capabilities in their class, as well as high duty cycles, the company reports.
The...
8/12/08
Thermal Dynamics has introduced the AirCut 15C manual plasma cutting system, which is suitable for HVACR applications.
The 29-lb. system, which has a built-in air compressor, cuts up to 3/16 in. with a 1/8-in. recommended cut. It includes a 120-V, 15-amp plug....
7/15/08
Thermacut Inc. has introduced a line of replacement parts for Hypertherm® Powermax® T-60® and T-80® hand torch bodies; 25- and 50-ft. lead sets; and torch with leads assemblies. The parts are compatible with Powermax 1000 and 1250 power supplies.
7/15/08
AKS Cutting Systems has introduced the tru-kut heavy-duty, 5-ft. by 10-ft. plasma cutting system. The rigid, fully welded steel frame provides a stable platform, the company reports.
Single setup machining of the frame and mounting surfaces helps improve system accuracy. The uniframe design prov...
6/17/08
3D Mfg. Inc.'s Razor Cut EL plasma cutting machine has a welded tubular frame and linear-motion rails—which are driven by a servo positioning system—on the X, Y, and Z axes.
The system has a light-duty power supply suitable for HVAC and small sheet metal shops. It can cut at more than...
3/11/08
The ProNest nesting system from MTC Software Inc. now offers plasma cutting support. A sheet and plate processing software program, the system automates industry-standard CNC, automatic gas plasma power supplies, and torch height controls.
The company says the software also reduces the manual int...
3/11/08
MG Systems and Welding has introduced the EdgeMax plasma cutting system, which offers unitized construction and multiple plasma torch options.
The system is suitable for HVAC, general fabrication, and precision plasma cutting with three basic models: the H, the G, and the P. The H is designed for...
1/15/08
Hypertherm has added a 150-amp consumable set to its Centricut® brand Innerlogic Proline2200 consumable line.
The consumables feature patented SilverLine® electrode technology, which involves welding a solid silver front end to a copper electrode base and inserting a hafnium pin into th...
1/15/08
Hypertherm offers a consumable kit designed to simplify and optimize plasma cutting for owners of Powermax1000®, 1250, and 1650.
Consumables for all types of cutting possible with a Powermax are included in the new kit. It has shielded consumables for everyday drag cutting in which the opera...
12/11/07
High-current-density plasma cutting system pierces, production cuts steel up to 2-in. thick
Kaliburn says its Spirit400a is the industry's first 400-amp, high-current-density plasma cutting system. The system, which produces 80 kW, is rated 400 amps at 200 V, 100 percent duty cycle. It pierces an...
12/11/07
Kaliburn has announced the expansion of its Spirit product line to include 150a and 200a models. The new systems—one a 150-amp model, the other a 200-amp—are automated high-definition plasma cutting systems that incorporate a hafnium technology.
Hafnium Optimizing Technology—HfO...
10/22/07
Miller Electric Mfg. Co. has introduced the Spectrum® 1251 air cutting and gouging system, designed for hand-held and automated cutting in heavy fabrication, manufacturing, demolition, and maintenance applications.
The cutting system, suitable for steel up to 1.75 in., has a 100-amp output a...
9/11/07
ProMotion® Controls Inc. has introduced an HS-862 upgrade kit for its older shape-cutting controls. The kit, designed to provide optimal Windows® operation, increases controller clock speed of the CPU and RAM.
The kit is available for the company's shape-cutting controls made with the G...
9/11/07
The modular drive, programmable shape machine from Bug-O Systems Inc. is a compact shape-cutting machine designed to run any shape or pattern. The machine—which can be used for flame cutting, plasma cutting, and welding—has a 20-shape-capacity memory that allows programming of various sh...
9/11/07
Hobart Welding Products has introduced the AirForce™250ci portable plasma cutting system. Featuring a built-in air compressor, the system weighs 27 lbs., half the weight of the company's previous model.
The system, powered by a 115-VAC household current, can cut 1/8-in. mild steel and se...
7/10/07
Hypertherm Inc. has released 50-amp cutting consumables designed to optimize operation when cutting mild steel with thickness between 22 ga. and 5/16 in.
The consumables are available for the HyPerformance Plasma® HPR130 and HPR260 systems, as well as for the HyDefinition® HD3070 and H...
7/10/07
Hypertherm®'s PowermaxEDGE® Sensor™ PHC, a combination of the Powermax® G3 Series™ plasma system and the automatic Sensor PHC (plasma height control), is available to authorized Powermax distributors and OEMs. The system provides simplified integration for entry-level, mecha...
6/12/07
Hypertherm Inc. has announced the release of HySpeed Plasma HSD130, a easy-to-use, mechanized, oxygen plasma system.
The system includes the company's patented LongLife® technology, designed to deliver double the consumable life at half the cost, the company says.
Recommended for small- ...
5/8/07
Plasma Automation Inc. introduces the VICON Elite, a multifunctional processing system that offers users precision plasma and oxyfuel cutting, scribing and drilling capabilities.
The specially designed gantry enables the use of various standard and/or precision plasma power supplies, as well as o...
4/10/07
ProMotion Controls, in cooperation with Kollmorgen Servotronix and Koike Aronson, has developed a high-performance digital AC drive amplifier system for shape-cutting machinery. The AC iDrives are the first AC drives designed to work with various motors, different motor sizes, and small to large mac...
4/10/07
Hypertherm Inc.'s PowermaxEDGE is designed to simplify mechanized plasma cutting system integration.
The bundled solution integrates a patented Powermax® G3 Series™ plasma system with either a standalone Sensor™ PHC (plasma height control) or the EDGE®l Ti CNC with integrated t...
4/10/07
MG Systems and Welding has introduced the OL200s plasma lifter. The lifter features smooth drive motion and contact-sense initial height sensing to set the pierce height precisely.
A small limit switch provides a secondary method of detecting heavily primed plate or meeting underwater cutting req...
3/13/07
A HyPerformance plasma torch upgrade from Hypertherm, Inc. brings the benefits of patented HyPerformance technology to existing HyDefinition HD3070 metal cutting systems. The upgrade is intended to Improve cut quality, increase productivity, and lower operating costs for owners of older HD3070 syste...
2/13/07
The Spirit275a plasma cutting and marking system from Kaliburn features expanded thickness capability, optimized cutting speeds, and dross-free cuts with minimal face beveling.
The 275-amp system offers production cutting of steel up to 1 ¼ in. thick with a maximum capacity of 2 in. Automatic gas...
12/12/06
MG Systems and Welding has introduced a video camera feature that can be used as an alignment tool and monitor the cutting process.
The camera, offered as an option for the company's TMC4500ST, MPC2000, Titan II, and MetalMaster Plus plasma and oxyfuel cutting machines, can monitor the operation ...
12/12/06
Hypertherm®'s Powermax®30 air/plasma cutting system features a tapered torch engineered to provide improved arc visibility and flexibility in hard-to-reach locations.
The 20-lb. system is compact and portable, yet designed for tough environments. It cuts 3/8 in. and severs metals up to...
12/12/06
AKS Cutting Systems has redesigned the drive system on its unitized accu-kut plasma systems.
The new drive system includes helical rack-and-pinion drives, providing smooth and accurate motion, the company states. The inline coupled arrangement of the servomotor and the precision planetary gearbox...
11/7/06
The HandyPlasma® 250 manual plasma cutting machine from ESAB Welding & Cutting Products operates on standard 110/115-V input and cuts up to ¼-in. carbon or stainless steel.
The 16-lb. machine is portable enough to travel to any job site. Torch, spare parts, air filter/regulator, input power ...
11/7/06
American Torch Tip Co. has released a full line of high-definition electrodes for use in high-amperage plasma applications.
The series is manufactured to hold tolerances to within ± 0.0005 in. for critical tolerances, providing consistent cut quality and extended electrode life. The replac...
9/12/06
Thermacut Inc. has expanded its plasma cutting consumable product line to include direct-replacement consumables for Hypertherm® PowerMax® series torches.
The product offering includes the patented Super-Life™ electrode with a silver-wrapped hafnium insert. The design incorporates ...
8/8/06
The HandyPlasma® 380 plasma cutting package from ESAB Welding & Cutting Products cuts 3/8- in. and severs ½-in. material.
The 208/230-VAC, single-phase machine comes complete with torch, spare parts, air filter/regulator, input power cord with plug, and work cable with clamp. System output i...
8/8/06
The PowerCut® 650 plasma cutting package from ESAB Welding & Cutting Products cuts up to 5/8-in. material and severs up to ¾-in. material.
The 53-lb. unit is compact in design and is transportable from job to job. A durable torch cable prevents snagging on fixtures and materials. The patente...
7/11/06
Hypertherm has released a new HyPerformance plasma torch upgrade for its HyDefinition HD4070 systems.
The torch-and-lead upgrade kit comes with a 6-, 10-, or 15-ft. torch lead; a 200-amp machine torch; HyPerformance torch lead set; and upgrade software; and upgrade field service bulletin, identi...
3/7/06
Motor Guard Corp. has introduced the DD-1008 mini desiccant dryer.
The dryer is a disposable, inline, point-of-use filter that features a color-change indicator when replacement is necessary.
Attached directly to a plasma cutter, air tool, blowgun, or paint spray gun, the dryer removes all tra...
3/7/06
MG Systems and Welding has introduced the version 3.0 of its Global Control software.
The new version includes a Job List feature that allows users to load several part programs into memory, assign unique cut parameters to each program, and set a location on the cutting table. A programmer can cr...
2/7/06
Thermal Dynamics® has introduced its CUTMASTER™ 151 air plasma cutting and gouging system, a 100-amp unit that cuts on a range of metal up to 1 ½ in. thick.
The system is suitable for heavy fabrication, maintenance, and manufacturing environments that deal with thick plate, such as scra...
1/10/06
The Global Rotator Δ contour plasma bevel unit from MG Systems and Welding provides the option of bevel cutting up to 400 amps for users in the mid-size to large gantry machine market. The rotator has a compound-skew design that keeps the critical components up and away from the cutting torch,...
1/10/06
The M-Series of waterjets from WARDJet Inc. enables operators to use a laser, robotic arm, oxyfuel cutter, or plasma cutter as a waterjet and drive the intensifier off compressed air in the shop.
A tent specifically designed and built to contain all the abrasive and water inside the tank makes it...
1/10/06
ESAB Welding & Cutting Products has introduced its m3 plasma system, which combines multiple plasma cutting and marking capabilities in a single system.
With a single plasma torch, the system produces high-speed standard plasma cutting; precision cutting and marking; and high-current, thick-plate...
10/11/05
Peddinghaus Corp.'s FBDB 2500/3 plate processing center incorporates punching, drilling, scribe marking, and thermal cutting technologies via plasma or oxyfuel into one machine.
The machine processes flat bar and plate stock from ¼ to 3 in. thick with capacity up to 96 in. wide and 20 ft. in-feed...
10/11/05
Thermal Dynamics® has introduced the 100-amp CUTMASTER™ 151 automated air plasma cutting system.
The system comprises the SL100 1Torch™ plasma torch, advanced torch connector (ATC™) quick disconnect, and a full-featured CNC interface accessible from either a CPC connector on t...
8/9/05
Hypertherm Inc. has extended its patented SilverPlus™ electrode technology to its HySpeed HT 4400 plasma cutting system. The electrodes are available for both 300-amp and 400-amp oxygen process cutting.
The electrodes comprise a silver front end fused onto a copper base. The electrode's hafni...
6/14/05
Miller Electric Mfg. Co.'s Spectrum® 1000 air plasma cutting and gouging system features Auto-Line™ technology, which allows automatic connection to any primary input voltage from 208 to 575 V, single or three phase, 50 to 60 Hz.
The system is designed for simple torch connection and removal. Auto-...
5/10/05
Thermacut Inc. offers its SilverEX®-Electrodes, which feature pure silver combined with special alloys. With a large hafnium insert, the electrodes are designed to enhance mechanized plasma cutting operations.
5/10/05
MG Systems and Welding's EdgeMaster dual side drive plasma and oxyfuel cutting machine travels at a jog speed of 1,000 IPM.
Available in widths from 8 ft. to 12 ft. and lengths from 10 ft. to 80 ft., the machine can cut stainless steel, mild steel, and aluminum from gauge to 12 in. It uses plasmas ...
4/12/05
InnerLogic Inc. has introduced four new plasma cutting machines, the fully automatic FineLine 150PC and 260PC and the ProLine 2150 and 2260 with manual controls.
The 150-amp FineLine 150PC cuts most metals up to ¾ in. and has a maximum capacity of up to 1 ½ in. The 260-amp FineLine 260PC cuts most ...
1/11/05
Messer MG Systems and Welding has introduced the Global Control, a professional-grade Microsoft.NET CNC for its cutting machines.
The control features a simple operator interface with a 15-in. touchscreen. Fully network and Internet compatible, the control has imbedded process databases and a fiber...
11/9/04
|
|
833 Featherstone Rd. 
Articles
